Powder 10-15meter;
Confetti & Streamers 15-20meter;
Water 25-30meter
Low‑pressure, high‑burst architecture ensures powerful output while maintaining safe, dependable long‑time operation.
Enables effortless installation and removal
The fast‑clip design enables speedy barrels installation while preventing accidental disconnection during high‑output operation.
Freely set working pressure between 4~8M Pa, and full inflation of the 12‑liter air tank only takes 1 m30s‑3 m 40s.
Delivers faster inflation speed and stays cool even during extended‑hour operation, ensuring stable, non‑stop performance.
One‑button quick triggering provides fast‑response effect launches for live‑event performances.
| Specifications | ||
|---|---|---|
| Product | Product Name | SKYFETTI SF-SK18 |
| Product Type | Confetti | |
| Electrical | Input Voltage&frequency | AC 200~240V ,50Hz |
| AC 100~120V ,60Hz | ||
| Power Consumption | 300W | |
| Power Connector | Neutrik® powerCON TRUE1 (in&out) | |
| Controlling | Control Options | DMX |
| Electric Control | ||
| DC Trigger | ||
| Control Protocols | DMX512 | |
| Control Connectors | Neutrik® 3/5-pole male/ female XLR | |
| Optimal Pressure Value | 116psi(8kg/cm², 8.0bar) | |
| Safety Vaive Pressure Value | 131psi(9kg/cm²,9.0bar) | |
| Inflation Time | 3.5min | |
| Confetti Barrel | Capacity | 1 kg confetti paper/ 10 pieces streamer |
| Diameter | 108mm | |
| Length | 68mm | |
| Water Barrel | Volume | 6L |
| Diameter | 108mm | |
| Length | 86.5mm | |
| Powder Barrel | Volume | 3kg |
| Diameter | 108mm | |
| Length | 86.5mm | |
| Effect | Color Paper Height | 15-20m |
| Streamer | 15-20m | |
| Water | 25-30m | |
| Powder | 10-15m | |
| Spray Angle | 40-70° | |
| Main Dimensions | Length | 636mm |
| Width | 390mm | |
| Height | 1067mm | |
| Weight | Empty Weight | 85kg |
No external air compressor is needed. The SF-SK18 features a revolutionary built-in pressurization system for fast automated air charging. It significantly reduces the downtime required for re-pressurization during continuous multi-shot operations, allowing tour crews to deploy a completely self-sustained high-impact launch setup with just a single power cord.
Absolutely safe for live stages. SkyFetti SF-SK18 houses a heavy-duty 12L large air tank and is specifically engineered with a low-pressure, high-burst safety structure. This ensures that the device does not need to store hazardous ultra-high pressure; instead, it safely converts lower relative tank pressures into massive kinetic energy for peak blast performance.
Near-instantaneous triggering with zero delay. SkyFetti SF-SK18 is armed with a premium millisecond-level pulse valve that achieves instant pressure release the microsecond a cue is active, delivering exceptionally sharp, powerful blast performance that satisfies high-end show timecodes.
The SF-SK18 is integrated with quick-connect adapters, allowing stage hands to easily switch between different heavy-duty barrels within seconds for all-in-one multi-effect use. Its quantified projection performance includes:
Confetti / Streamers Launching:
The SF-SK18 delivers exceptional integration adaptability, supporting three distinct operation modes: standard DMX-512 protocol, electric direct switch control, and DC trigger inputs. Beyond daisy-chaining via standard DMX lines into premium show consoles like MA Lighting for intricate timecode-synchronized matrix sequences, it empowers installation riggers to utilize the DC trigger logic. This allows for direct seamless wiring into theme park automated master controllers, theatrical staging networks, or professional pyrotechnic firing systems for millisecond-precise safe launching the microsecond a DC signal pulse is applied.
The high-speed pneumatic pulse valve and internal compression pumps demand fluid/particle purity. First, when utilizing the water columns effect, the use of clean distilled or purified water is mandatory; never load mineral-heavy tap water or contaminated fluids to prevent valve scaling. Second, when running color powder blasts, you must use our officially certified ultra-fine, low-moisture stage powder; cheap or damp third-party powders will cause irreversible valve jams. Any valve leakages, piston clogs, compressor burnouts, or main board short circuits resulting from unapproved third-party fluids or moisture-heavy clumping powder will completely void the official factory warranty.
Absolutely not! In fact, it delivering even punchier explosive power. Traditional confetti machines are notoriously massive and require cumbersome external CO₂ gas cylinders or heavy air compressors, spiking transport costs. The SF-SK18 is a self-sustained powerhouse that integrates a premium automated pressurization system and a 12L air tank into a highly compact, space-saving frame. Armed with a premium millisecond-level pulse valve for rapid high-pressure release, it blasts confetti or streamers up to an astonishing 15–20 meters high, delivering stadium-grade impact that easily matches or outperforms standard bulky alternatives.
To ensure a worry-free experience, we proudly offer a 1-Year Warranty for our FX products . If your products experiences a covered issue during the warranty period, our technical team will carefully assess the unit and provide the most appropriate solution. Based on the evaluation, we will arrange professional repair or provide a replacement unit (new or refurbished) to ensure your product continues to perform at its best.
After-sales Service: Our after-sales staff are always online to answer any questions regarding our products and their usage. Even if the warranty period has expired, our professionals will still be there to answer your questions, provide advice, or handle maintenance and repair issues.
